The use of surveillance cameras has been increasing day after day due to security purposes. People usually install security cameras at home, offices, or businesses to keep an eye on their valuable properties.
Security cameras can be installed easily at home or other places with ease. But, people find it difficult when it needs to be mounted on Vinyl Siding.
What is Vinyl Siding? It is an external overlay for home or commercial buildings. Vinyl Siding combines Polyvinyl chloride (PVC) and other materials that give it color, durability, and flexibility.
However, in this assessment, we’ll demonstrate How To Mount Security Camera On Vinyl Siding without difficulties. So, stay with us and keep reading with full of intent.
Tools And Materials You’ll Need
To mount Security Cameras for Rural Properties, you need to assemble some tools and materials to make your task easier. Here, we have provided a list of materials.
- A Drill Machine
- No Hole Clip Hooks [ No Hole Options for Security Cameras]
- Proper Supply
- Cables
- Wires
- Connectors
- Mounting Bucket
- Wrench
How To Mount Security Camera On Vinyl Siding
Once all the material is assembled, you can start installing security cameras on Vinyl Siding. In this segment, we have discussed the whole procedure step by step.
So, without any further ado, let’s get started.
1. Select a Perfect location
It is always crucial to select the right place before kick-off the installation process. To have the perfect view, place the camera as high as possible. You can also choose a place that can only be reached using a ladder to prevent potential intruders from adjusting with the camera. Apart from that, you need to make sure that the camera you will mount will not be obstructed by trees, other buildings, or shrubs.
Place the camera from where you can see the view of the below locations
- The main entrance of the house
- Your garage or Parking space
- Front grounds of your house
- A significant portion of the street that leads to your home
2. Bring a Reliable Ladder
After picking up a perfect place to set a security camera, you have to take a reliable ladder. Place it securely on level ground. You should take someone to help hold the ladder during your climbing up. Accidents may happen; so, it is better not to take risks.
3. Mark The Holes With A Pencil for The Screw
Once you have moved the ladder upward and are up to reach the location you picked up for installing the camera, set the mounting bucket on the vinyl siding and hold it with your left hand. With your right hand, specify the holes for the screw with a pencil. Ensure that the markings are big enough and simple to spot.
4. Check The Siding To See What Surface
In this stage, you have to inspect the vinyl siding. You need to have a good grasp of the surface you are going to work with. Move the roofing shingles up a bit and check out the top part of the siding. Search behind it to uncover whether the wall beneath is wood or masonry. After that, test the vinyl siding thickness with the help of tape. Measuring thickness will confer you a clear idea of the needed depth of the drill bit.
5. Get The Correct Drill Bit & Drill The Holes
Once all the above tasks are accomplished, you have to get the right drill around 1/16 inch larger than the screw. Now follow the steps below.
- Mount the bit into the power drill
- Place the drill on the pencil marks that you did so that the bit can make a hole in the siding horizontally and straightly.
- Hold the drill firmly and start drilling carefully. Stay away from angling the drill up, down, or the sides.
- Drill until the bit has touched the boxing underneath
- Stop drilling when you see the drill bit with a diameter 1/16 to 1/8 inch smaller than the screw you will install. Again, continue drilling into the boxing drill up to ½ inch.
- Similarly, drill all the pencil marks. We would like to remind you that, you may need to have a more extended bit to drill the hole for the wires.
6. Use No Hole Clip Hooks as Alternative
If you don’t own a drill or want to rupture your siding, it will be better to use no-hole hooks. With the help of the tool, you can install your security camera without drilling a single hole in the siding vinyl. All you need to do is spin the hook into jointure in the siding. Apart from that, they are easy to detach when you need them; thus, if you live in a rental house, clip hooks will be the best choice.
7. Spin Your Security Camera Firmly
As you have already drilled our siding vinyl or attached siding clips, it is time to screw the camera on tightly. Place the camera up to the siding, and make sure that its screw has assembled with those drilled holes. Now, start inserting the screw and tighten it with a wrench.
8. Put The Wires Through
If you don’t have a wireless camera, and it comes with wires, then insert the wire through the hole you have drilled in the wall keeping the purposes in mind.
9. Set Up Camera
Now that you are in the final step, all you need to do is set up the camera. You can do it by applying the instructions that come with the camera that the manufacturer provides.
Tips When Mounting A Security Camera On Vinyl Siding
Here are some tips that you should consider while mounting a security camera on vinyl siding.
- Mount camera at least 8 to 10 feet from the ground
- Never place the camera directly at the sun
- Point camera under eaves or any other semi-protected place
- Test all the equipment related to the security camera before mounting
- Stay away from using hardware tools while installing the camera that may damage its materials
- Try to clean your security camera after a certain period with a soft cloth
Final Verdict
Installing security cameras is not as difficult as you think. Following some simple steps that we mentioned, you can accomplish the task. Here we can recap the whole procedure in short.
First, select an excellent location from where you can get better views of your camera. After that, mark the holes using a mountain bucket with a pencil. Now, take a drill machine, mount a drill bit, and drill the holes one by one.
When the drilling is accomplished, screw the camera tightly. And then set up the camera following the manufacturer’s instructions.
So, it was all about, How To Mount Security Camera On Vinyl Siding. We hope you’ll be benefited from the context above.
